技術的変化と産業システム、私たちの使命
セッズは、お客様にとって最善かつ経済的なソリューションを提供します。
ZhongTuo 2/3 Waves Highway Guardrail Roll Forming Machine
冷間ロール成形機の異なるタイプ。私達は 2006 年以来の機械を形作るロールの設計そして製造で従事している長い歴史の工場です。私達が作り出してもいい機械は下記のものを含んでいます: 機械、機械を作る cz の母屋を作る屋根瓦機械、機械を作る軽い鋼鉄キール、金属浮彫りになる機械、機械を形作るドア システム天井システム高周波管の溶接機、ラインを切り開くこと、長さライン、機械を形作る棚システムを形作る床 Decking 機械、色の石造りのタイルの生産ライン、熱い薄板になるフィルムで形造る機械、等を切ります。
The dual-wave barrier is a semi-rigid crash barrier featuring double corrugated profiles, composed of two continuous steel plates with wave-shaped peaks and valleys, circular tubular posts, support brackets/anti-blocking blocks, and connecting bolts, serving as a fundamental safety protection component for road infrastructure.
The triple-wave barrier is a three-layer corrugated reinforced high-protection barrier with widened panels and significantly enhanced cross-sectional stiffness, classified as a premium safety collision prevention facility primarily used for upgrading protection on hazardous highway sections.
Working flow
Hydraulic uncoiler—leveler —Press and pinch——3 set hydraulic pre punching and pre cutting—-roll forming machine—-Post hydraulic stop cutting—-Transport table—automatic stacker
Profile drawing
As per profile drawing
Product width: 310mm/506mm
Product height:85mm
Product length: 4000mm/4320mm/4500mm or as client’s requestlength tolerance:±2mm
Main technical parameters
Coil mechanical property
Material: S235jr, S355jr
Steel coil thickness:3.0mm
Coil width:477/744mm （final coil width depends on the drawing provided by client）
Coil ID:φ508～φ600
Coil OD:≤φ1600
Coil weight: ≤10T
Machine technical specification
Forming type: cold roll forming
Production speed:≤10m/min （4500mm length around 1-2 PCS per minute）
Working direction: from right to left or from left to right
Voltage:380V, 50Hz, 3Phase( as client’s request)
Total power: approximate 138KW
Machine parts details
Hydrualic uncoiler with a cart
Uncoiler: driven by electric motor , mandrel shrink and expand by hydrualic
Uncoiler capacity: 10T
Uncoiler mandrel suitable for coil ID: φ508mm/φ610mm
Suitable coil width:≤800mm
Main motor power:7.5KW
Hydraulic motor power:3KW
Hydraulic oil pump: vane pump
Uncoiler mandrel diameter: φ190mm
Oil cylinder diameter: φ200mm
Electric control system, inverter, low capacity electric parts adopt famous brand
Leveler
Coil width: ≤800mm
Coil thickness: 3.0mm
Reducer: 160 model,7.5KW
Leveling rollers: up 3+ down 4, total 7 levelling rollers, 2 pinch rollers; leveling rollers material is 40Cr, heat treatment, HRC48-52.
Speed control method: Frequency converter speed control
The gap of levelling rollers adjust way: by manual
Steel strip width adjust way: by manual
Hydraulic Press and pinch
Structure and form: steel plate welded structural component, large tongue plate lifting, small tongue plate telescopic.
Large tongue plate lifting power: provided by air cylinder
Small tongue plate telescopic power: provided by air cylinder
Structure and form of the feeding machine: steelplate welded structural components
Hydraulic pre punching & pre cutting
The cylinder diameter is 250mm and 120mm, with a stroke of 30mm. It has a four-column structure and the base is made of steel plate welded and tempered.
Punching station: 3 sets
Pre cutting blade material: Cr12MoV, heat treatment, HRC 58-62
Hydraulic station motor power:45KW, motor brand is Siemens Innomotics.
Conveyor belt: Used to convey the punched waste materials into the waste box.
Main roll forming machine
Forming machine frame: Made of high-quality steel sections, which are welded and then subjected to shot blasting or vibration treatment. It is machined by CNC numerical control gantry milling machine. Each rolling station has a positioning key groove on the bottom of the frame, ensuring the parallelism of the roller shafts.
Rolling station: 3W profile 20 rolling station, 2W profile 15 rolling station.
From 3W profile change to 2W profile, it is quick change. 3W and 2W share the same one machine basic frame. The 2W profile the distance of two rolling stations should be bigger than 3W profile.
With water cooling system
With safty protective net
Hydraulic stop cutting, there is no steel waste
Cutting model: post cutting, hydraulic stop cutting
Cutting blade: Material H13, quenched treatment （ HRC 58-62 ）
Hydraulic station motor power: 15KW
Cutting blade: 2 sets, 1 set fro 2W, 1 set for 3W
Transport table
Structure: there are rollers on the table, steel channel welded the frame, transport 2 waves and 3 waves automatcally.
Dimension: length 4m x width 1m
Electric motor power: 3KW
Automatic stacker
Square tube welded, with movable rollers
4m length
Up and down control by servo motor, power 3kw
Side move control by servo motor, power 1.5kw
Cylinder swing blanking
Control system
The use of Siemens PLC electrical control, can manually and automatically control the entire production line of each part of the action coordination electrical cabinet with 7 inch touch screen, can adjust and modify some parameters according to production needs
The electronic control console is equipped with switches for starting, stopping, converting, adjusting and other components of each electrical component, and equipped with emergency stop buttons for equipment failure.
- Inverter brand: Siemens
- PLC brand: Siemens
- Touch screen brand: Siemens
- Encoder brand: Omron
- Low capacity electric parts: Siemens
私たちを選ぶ理由
OEM/ODM＆カスタマイズワンストップサービス
充実したアフターサービス
OEM、ODMの提供
2.技術者の設計: デッサンのプロフィールおよび 3D 機械デッサンを作って下さい
3.構成と生産を決定する
4.納品前テスト
6.技術指導
7.アフターサービス：複雑な機械の設置サービスと定期的な顧客訪問
95800社以上の信頼
質の高い企業です。私たちとの協力を通じて、彼らは次のようなものを得ています。
強力なサポートを得て、事業の躍進と発展を遂げた。
