24年以上の経験と知識 国際規格、
技術的変化と産業システム、私たちの使命
セッズは、お客様にとって最善かつ経済的なソリューションを提供します。
CZ Purlin Roll Forming Machine: What to Compare Before You Buy
機械類 Co.,Ltd を形作る滄州 Zhongtuo ロールは河北中国から来ます。それは設計および製造に専用されている製造業者です。
冷間ロール成形機の異なるタイプ。私達は 2006 年以来の機械を形作るロールの設計そして製造で従事している長い歴史の工場です。私達が作り出してもいい機械は下記のものを含んでいます: 機械、機械を作る cz の母屋を作る屋根瓦機械、機械を作る軽い鋼鉄キール、金属浮彫りになる機械、機械を形作るドア システム天井システム高周波管の溶接機、ラインを切り開くこと、長さライン、機械を形作る棚システムを形作る床 Decking 機械、色の石造りのタイルの生産ライン、熱い薄板になるフィルムで形造る機械、等を切ります。
+86-317-2191158
中華人民共和国佛山市佛頭区経済開発区4号路
詳細、納期、価格については、メールでお問い合わせください!
お問い合わせ

ブランクフォーム (#5)

C Purlin Forming Machine
PlayPlay
previous arrow
next arrow
C Purlin Forming Machine
C Purlin Forming Machine
CZ Purline Machine
CZ Purline Machine
C Purline and Z Purline Machine
previous arrow
next arrow

CZ Purlin Roll Forming Machine: What to Compare Before You Buy

A CZ purlin roll forming machine turns galvanized steel coil into the C and Z sections that carry roof and wall sheeting on a steel structure building. It looks like a simple line of roll stands, but the machine that suits one factory rarely suits the next: a wall panel producer needs many short C runs, while a roofing contractor may need long Z runs in lapped spans. This guide explains what the machine actually does, where the real cost differences sit, and which questions to settle before you send a quotation request.
CZ Purlin Roll Forming Machine: What to Compare Before You Buy - 20210804 1021 1794378624 2SNW
CZ Purlin Roll Forming Machine: What to Compare Before You Buy

What a CZ purlin roll forming machine actually produces

Purlins are the secondary framing members fixed between rafters or columns. In cold-formed steel buildings they are roll formed rather than hot rolled, because the section is thin, light and cheap to produce in long lengths on site-driven schedules. Two profiles dominate:
  • C purlins have two flanges bent in the same direction. They work as simple spans, typically under roof sheeting and wall cladding, and are easy to handle and stack.
  • Z purlins have flanges bent in opposite directions, so two sections nest and overlap when lapped. Nested Z purlins behave as a continuous member over several bays, which makes them the usual choice for long roof spans and for structures where deflection matters.
Both start from the same galvanized coil. What separates the profiles is the forming sequence and the direction of the final flange, which is why a machine built for both needs a way to reconfigure its roll tooling rather than simply pushing a different length through.

One machine or two: CZ combined versus dedicated C and Z lines

A dedicated C line or Z line is the cheaper and simpler option when your order book is dominated by one profile. Rolls are fixed, the setup never changes, and operators do not need to think about tooling. The trade-off is that any Z enquiry on a C-only line becomes an outsourced job.
A CZ purlin roll forming machine shares one decoiler, one leveling unit, one punching station and one cutting head, and switches the forming section between C and Z. The value is obvious for a fabricator with a mixed order book: one investment covers both products, one operator runs both, and one spare parts stock serves the whole line. The cost appears later, in changeover time and in how much of the tooling has to be moved by hand.
The practical rule is simple. If more than roughly one fifth of your output is the "other" profile, a combined machine earns its extra cost. If that figure is under a tenth and your runs are long, a dedicated line plus an outsourced Z supply is usually the better commercial decision.

What sits on a complete CZ purlin line

Quotations are often compared on price alone, and price differences usually come from what has been left off the line. A complete CZ purlin roll forming line normally includes:
  • デコイラー with coil car, typically hydraulic, sized for 3 to 5 t coils depending on coil width and thickness.
  • Leveling and feed unit to flatten coil memory before forming, with a loop or accumulator to keep tension steady.
  • Punching station for web holes, flange holes and end fixing holes, usually hydraulic with quick-change dies, sometimes combined with notching.
  • Main roll forming section, commonly in the region of 14 to 20 stands for these profiles, mounted on a heavy welded frame.
  • Straightening unit after forming to control camber and twist on long sections.
  • Cutting head, normally a hydraulic flying shear or post-cut saw that follows the moving strip so length accuracy does not depend on stopping the line.
  • Run-out table and stacker to collect sections without bending them at the ends.
  • Control cabinet with PLC, encoder-based length control, recipe storage and fault display.
If a quotation lists only "forming machine and cutter", ask what happened to the leveler, the punching unit and the stacker. Those items do not disappear; they move into your own cost and your own commissioning risk.
CZ Purlin Roll Forming Machine: What to Compare Before You Buy - 20210804 1026 1794378504 wNtr
CZ Purlin Roll Forming Machine: What to Compare Before You Buy

The specifications worth comparing

Specification sheets are easy to inflate. These are the figures that genuinely change what the machine can do, and the ranges below are typical of the market rather than promises:
  • Material thickness: most CZ lines are built for roughly 1.2 to 3.0 mm galvanized or cold rolled steel, with 1.5 to 2.5 mm being the working heart of the range. Check whether the top of the range is a real production figure or a "can pass through once" figure.
  • Yield strength: lines intended for Q345 or grade 350 material behave differently from those built for 550 MPa high-strength coil. Higher strength means more forming torque and more spring-back to control.
  • Profile range: web depth, flange width and lip depth the tooling is cut for. A machine quoted for one profile is not automatically able to run another, and "adjustable" needs to be defined in millimetres.
  • Coil width and weight: derived from the developed width of your largest profile. An undersized decoiler is the most common cause of early complaints.
  • Line speed: typically in the range of 8 to 20 m/min, faster on thin material and slower on heavy sections. Treat a headline speed without a thickness attached as marketing.
  • Length tolerance: encoder plus flying shear commonly holds around plus or minus 1 to 2 mm on repeat lengths. Ask how it is measured, on which profile and at which speed.
  • Changeover method: manual roll change, bolt-on cassette or hydraulic quick-change. This single item drives your labour cost for years.
  • Power supply: confirm three-phase voltage, frequency and total installed power against your site before the order, not after.

Changeover time is where the money hides

A combined machine only pays off if the switch between C and Z is fast enough to be done several times a week. On older designs the operator moves roll clusters and re-shims spacers by hand; a changeover can take the better part of a shift, so the machine quietly becomes a single-profile line.
Cassette-based designs replace the roll cluster as one unit, and hydraulic quick-change systems lock the cassette from the control panel. Realistic changeover for a well-designed cassette machine is in the region of fifteen to forty minutes including first-piece check. When you compare quotes, ask for the changeover procedure in writing, the number of people required, and a video of the sequence. Then ask how many spare cassettes are included, because one cassette per profile still leaves you changing rolls when a profile wears.

How much automation you actually need

Automation is usually quoted as a ladder, and it is easy to buy a rung you will not use. A single operator can run a line with automatic length control, automatic stacking and a recipe library comfortably. Full coil-to-pallet automation makes sense at high volume with few profile changes, and makes little sense in a job shop where the order changes every few hours.
Two automation items are worth paying for in almost every case: encoder-based length control with a flying shear, which removes the stop-start cycle that limits output, and stored recipes, which remove the trial-and-error first piece after every changeover. Items such as automatic coil loading or remote diagnostics are conveniences; decide on them after the core line is right.
CZ Purlin Roll Forming Machine: What to Compare Before You Buy - 20210804 1029 1794378299 7I7a
CZ Purlin Roll Forming Machine: What to Compare Before You Buy

What to send with your quotation request

Most slow quotations are caused by incomplete enquiries. A supplier who receives the following can quote a real machine instead of a guess:
  • A profile drawing for each C and Z section, with web, flange, lip and thickness dimensions.
  • The material specification: galvanized or cold rolled, yield strength, coating weight.
  • Your thickness range and the split of your order book between C and Z, in percentages.
  • Typical and maximum section length, and the hole pattern drawings with hole diameter and position.
  • Required output per shift, so line speed and changeover can be matched to it.
  • Coil supply details: inner diameter, outer diameter, maximum weight.
  • Site power supply, available floor length and the destination port.
Send the same package to every supplier. Comparable quotations are only possible when the scope is identical, and a supplier who answers a vague enquiry with a firm price is usually pricing a smaller machine than you imagined.

How to judge build quality before it ships

Roll forming machines fail in predictable places, and those places are visible before delivery if you know what to inspect:
  • Frame and stands: welded and machined, not bolted sheet metal. Check wall thickness and how the stand locates on the base.
  • Roll material and finish: through-hardened tool steel such as Cr12MoV or equivalent, ground and polished, with chrome or similar surface treatment where abrasive galvanized coating is run.
  • Shafts and bearings: shaft diameter against the load of your heaviest section, and bearing type specified by brand rather than "good quality".
  • Hydraulics and electrics: named brands for pump, valves, PLC, drives and contactors. Unbranded components are the first thing to fail and the hardest to replace abroad.
  • Punching and cutting tooling: quick-change design, hardened dies, and a sensible spare set included.
  • Test report: a factory acceptance test on your own coil and profile, with length and hole position measured and recorded.
Ask for photos of these items during build and for the test report before shipment. A supplier who resists a factory test is telling you something.
CZ Purlin Roll Forming Machine: What to Compare Before You Buy - 20210804 1022 1794378226 s5MW
CZ Purlin Roll Forming Machine: What to Compare Before You Buy

Installation, commissioning and everyday maintenance

Plan the footprint first: a complete CZ line with decoiler, run-out table and stacker commonly needs in the order of 25 to 35 m of length, plus clearance for coil handling. Foundations, levelling and cable routing are your scope unless the contract says otherwise.
Commissioning normally covers mechanical levelling, roll gap setting for each thickness, punching and cutting alignment, and trial runs on your profiles. Budget a week to two weeks on site for a first installation, and ask for remote support in the warranty terms, because the alternative is an expensive flight.
Daily maintenance is modest but not optional: check oil levels and hydraulic pressure, clean and lubricate the roll surfaces, inspect punches and dies for wear, verify the encoder and length setting after any tooling change, and keep the leveler rolls clean. A machine that is greased and checked monthly runs for a decade; one that is not starts producing twisted sections within a year.

Total cost of ownership, not just the price tag

The purchase price is a fraction of what the line costs you. Add the cost of spare rolls and punches over five years, changeover labour multiplied by the number of changes per week, freight and duty, foundations and power connection, installation and commissioning, operator training, and the downtime caused by parts that must be imported. Two quotes that differ by fifteen percent can reverse their ranking once changeover labour and spare parts are included.
The right comparison is cost per metre of finished purlin over the profile mix you actually sell, not the invoice value of the machine.
CZ Purlin Roll Forming Machine: What to Compare Before You Buy - 20210804 1020 1794378169 LnLZ
CZ Purlin Roll Forming Machine: What to Compare Before You Buy

Frequently asked questions

Can one CZ purlin roll forming machine really produce both C and Z purlins?

Yes, provided the forming section is designed for it. The common approaches are interchangeable roll cassettes, movable roll clusters, or a combination of shared stands and dedicated stands. The profiles must share coil width compatibility, and the changeover procedure must be documented. Ask for a video of the actual change, not a description.

What steel coil thickness can a CZ line handle?

Most lines in this class are built for roughly 1.2 to 3.0 mm, with the practical production range narrower than the nameplate range. The upper limit also depends on yield strength: the same machine that runs 3.0 mm mild steel may be limited to about 2.0 mm at 550 MPa. Always state both thickness and grade when enquiring.

How long does it take to change from C to Z?

Manual roll changes can take several hours; cassette systems are typically in the region of fifteen to forty minutes including the first-piece check. The number matters because it decides whether a combined line is genuinely flexible or effectively single-profile.

私たちを選ぶ理由

弊社は国家レベルのハイテク企業である。ISO9001品質システム認証、欧州CE安全認証、北米CAS認証などを取得しました。私達に輸出貿易で豊富な経験があり、異なった国の顧客の必要性を理解します。 一方、我々は満足のいく設計ソリューションを顧客に提供することができます。私達の機械は 150 ヶ国以上に輸出され、私達は顧客との長期および安定した協同関係を確立し、顧客の賞賛に勝ちました。
グローバルな信頼: 156を超える国と地域のお客様に信頼され、当社の屋根シート製造機は、その卓越した性能と信頼性で世界的に認められています。
アフリカのザンビアで、機械を形作る Zhongtuo ロールは安定した操作にあります
自動CUキール機-モンゴルのお客様は工場を視察し、私たちと協力します。
Zhongtuo金属スリットラインは、ブラジルの顧客のためにカスタマイズされた
ようこそWedo LLCへ!当社のロール成形機工場をご訪問ください。
滄州中拓ロール成形機にアメリカの友人たちが戻ってきた
機械を形作る金属の屋根ふきロールは自動積み重ねシステムとの R のパネル及び控えめなプロフィールを作り出します
ロール成形機のアフターサービスに関するお客様の声
アゼルバイジャンのお客様による弊社ロール成形工場へのご訪問!
Zhongtuoロール成形ソリューション|グローバル産業のためのカスタマイズされた機械
360°VRシステムを通してZhongtuoを訪問し、滄州Zhongtuoは機械の異なったタイプを形作る冷間圧延の設計そして製造に専用されている2014年に確立された。私達は ODM、OEM およびワンストップ サービスを提供します。原料、機械類および付属品は私達から購入することができます。
360°VRシステムを通してZhongtuoを訪問しなさい、滄州Zhongtuoは機械を形作る異なったタイプの冷間圧延の設計そして製造に専用されている2004年に確立された。私達は ODM、OEM およびワンストップ サービスを提供します。原料、機械類および付属品は私達から購入することができます。

OEM/ODM&カスタマイズワンストップサービス

お問い合わせ
ブランクフォーム (#5)

充実したアフターサービス

お問い合わせ
ブランクフォーム (#5)
プロダクション・モニタリングにおけるインテリジェンス: リアルタイムのモニタリングにより、生産の異常を防ぐ。
インテリジェントなリマインダー: 異常リマインダー、マシンメンテナンスリマインダーなど。- 効果的に機械の耐用年数を延長します。
インテリジェントなアフターセールス: 真にリモート・コントロールのアフターセールスを実現し、顧客のローカルにエンジニアを送る必要がなく、アフターセールスの時間を節約し、メンテナンス費用を節約することを達成した。
シーメンス-PLC制御との協力 シーメンスによるグローバル保証。
2台のマシンを購入すると、このインテリジェンス・コンピュータが無料になります!

OEM、ODMの提供

1.コミュニケーション:バイヤーの要件を確認します。
2.技術者の設計: デッサンのプロフィールおよび 3D 機械デッサンを作って下さい
3.構成と生産を決定する
4.納品前テスト
5.梱包と配送
6.技術指導
7.アフターサービス:複雑な機械の設置サービスと定期的な顧客訪問

95800社以上の信頼

我々は、多くの企業と幅広く協力できることを光栄に思っている。
質の高い企業です。私たちとの協力を通じて、彼らは次のようなものを得ています。
強力なサポートを得て、事業の躍進と発展を遂げた。
0
ISO9001およびCE認定
私たちは、お客様との長期ビジネスを確立されています。私達のプロダクトの何れかのモデルに興味がある場合は、お問い合わせは、自由にしてくださいを参照してください。
0
各国顧客
ユーザーから高い評価を得ている人気商品。
0
ワンストップ・ソリューション
アクセサリーから成形機まで、お客様の複雑な調達を解決します。
0
エンジニアチーム
私達に 20 人以上の強いエンジニアのチームがあります、私達はより正確で、より速い解決を与えます。