超过 24 年的经验和国际标准知识、
技术变革与工业系统，我们致力于
为 Seds 的尊贵客户提供最佳和经济的解决方案。
技术变革与工业系统，我们致力于
为 Seds 的尊贵客户提供最佳和经济的解决方案。
Cable Tray Roll Forming Machine | Auto Adjustable Line
沧州中拓滚压成型机械有限公司来自中国河北。它是一家致力于设计和制造的制造商。
不同类型的冷弯成型机。我们是一家历史悠久的工厂，自 2006 年以来一直从事冷弯成型机的设计和制造。我们能生产的机器包括：屋面瓦成型机、CZ 檩条成型机、轻钢龙骨成型机、金属压花机、门系统成型机、天花板系统成型机、高频焊管机、分切生产线、定长切割生产线、货架系统成型机、地板装饰板成型机、彩石瓦生产线、热贴膜机等。
不同类型的冷弯成型机。我们是一家历史悠久的工厂，自 2006 年以来一直从事冷弯成型机的设计和制造。我们能生产的机器包括：屋面瓦成型机、CZ 檩条成型机、轻钢龙骨成型机、金属压花机、门系统成型机、天花板系统成型机、高频焊管机、分切生产线、定长切割生产线、货架系统成型机、地板装饰板成型机、彩石瓦生产线、热贴膜机等。
如需了解更多信息、交货时间和价格，请给我们发邮件！
Cable Tray Roll Forming Machine | Auto Adjustable Line
Description:Automatic cable tray roll forming machine for perforated, ladder & trough trays. GI/SS/aluminum, 0.8–1.5mm, PLC control. Request a quote.
Cable Tray Roll Forming Machine for Perforated, Ladder and Trough Trays
A cable tray roll forming machine is a continuous production line that turns galvanized steel, stainless steel or aluminum strip into finished cable trays—uncoiling, leveling, servo punching, roll forming and cut-to-length in one pass. It is built for electrical contractors, switchgear manufacturers and steel-profile factories that need consistent hole patterns, straight edges and repeatable dimensions instead of manual welding or press-brake bending.
Most buyers searching for a cable tray making machine are comparing automation level, size-changeover method, punching accuracy and after-sales support. The section below answers those points before the spec table, so procurement engineers can qualify the machine without a sales call.
What Profiles Can One Machine Produce
A properly configured line handles the three dominant cable management profiles:
Perforated cable tray – ventilated bottom with rounded holes, 100–600 mm width
Ladder cable tray – side rails + welded/formed rungs, common in power plants
Trough (channel) cable tray – enclosed U-shape for office and data-center wiring
Width and height are adjusted by PLC-controlled side-wall movement or quick-change spacers. You do not need separate roller sets for every size if the order range stays inside the machine’s adjustable window (e.g. 100–600 mm width, 50–150 mm height).
Standard Production Flow
Hydraulic decoiler → 7-roller leveler → Servo feeder → Multi-station punching press → Roll forming stands → Hydraulic cut-to-length → Outfeed table
Each station is synchronized by the PLC. The operator selects a stored recipe (tray type + width + hole pitch), and the line auto-feeds the correct length before each punch stroke. This removes the manual marking step that causes hole misalignment in low-end lines.
Key Technical Specifications (Export Version)
| Item | Typical range / value |
| Applicable material | Hot-dip GI, cold-rolled steel, SS304, aluminum |
| 材料厚度 | 0.8 – 1.5 mm (up to 2.0 mm on request) |
| Tray width | 100 – 600 mm |
| Tray height | 50 – 150 mm |
| 成型速度 | 0 – 15 m/min (PLC stepless) |
| Punching accuracy | Hole pitch ±0.5 mm |
| Length tolerance | ±1.0 mm |
| Main motor | 11 kW (Siemens optional) |
| 控制系统 | PLC + HMI, recipe memory, fault diagnosis |
| Power supply | 380V/50Hz/3Ph (customizable) |
| Compliance | CE, IP54 cabinet |
These numbers are not the maximum physically possible—they are the stable working window we recommend for 24/7 plant use without frequent roller re-tightening.
Why It Matters for Overseas Buyers
Lower labor: one operator loads coils and watches the HMI; the line auto-stacks trays.
Interchangeable installation: ±0.5 mm hole accuracy means trays from batch #1 and batch #50 still share brackets.
Customization without retooling cost: European ladder pitch, Middle East heavy-duty thickness, or South-American perforated pattern are saved as recipes.
Sea-shipping ready: main frame is anti-rust oiled, wrapped in film, and steel-wire fixed in 40HQ.
Application Scenarios
This equipment fits factories supplying:
Commercial building wiring systems
Substation and transformer stations
Data center raised-floor cable routes
Oil & gas plant cable ladders
Solar farm DC cable management
If your project mixes ladder trays and perforated trays in the same tender, choose the auto-changeover version rather than the fixed-width version—the payback comes from avoiding a second production line.
FAQ
Q: Can the machine punch side holes and bottom holes at the same time?
A: Yes. We use a multi-station pneumatic/hydraulic punch with combined dies. Bottom perforation and side mounting holes are completed in one indexing stroke.
Q: How long does width change take?
A: On the automatic version, 5–10 minutes via HMI + motorized side walls. On the manual-spacer version, 20–30 minutes with tools.
Q: Do you provide tray profile drawings?
A: We can run production from your CAD drawing, or supply standard ISO/DIN-style tray profiles for sampling before deposit.
Q: What about installation abroad?
A: We send wired-and-tested containers, plus PDF manuals and a remote commissioning session. On-site engineer dispatch is optional (added cost, visa/invitation supported).
Q: Is the PLC in English?
A: Default HMI is English; Spanish/Russian/Arabic/Chinese switchable.
为什么选择我们？
我们是国家级高新技术企业。公司通过了 ISO9001 质量体系认证、欧洲 CE 安全认证、北美 CAS 认证等。我们拥有丰富的出口贸易经验，了解不同国家客户的需求。 同时，我们还能为客户提供满意的设计方案。我们的机器已出口到 150 多个国家，并与客户建立了长期稳定的合作关系，赢得了客户的一致好评。
通过 360° VR 系统访问中拓，沧州中拓成立于 2014 年，致力于设计和制造不同类型的冷弯成型机。我们提供 ODM、OEM 和一站式服务。原材料、机械和配件均可从我们这里购买。
OEM/ODM 和定制一站式服务
全面的售后服务支持
提供 OEM、ODM
1.沟通：确认买方要求。
2.技术人员设计：绘制型材图和 3D 机器图
3.确定配置和生产
4.交货前测试
2.技术人员设计：绘制型材图和 3D 机器图
3.确定配置和生产
4.交货前测试
5.包装和交付
6.技术指导
7.售后服务：复杂机器的安装服务和定期客户回访
6.技术指导
7.售后服务：复杂机器的安装服务和定期客户回访
受到 95800 多家公司的信任
我们很荣幸能与许多
优质企业。通过与我们的合作，他们获得了
大力支持，实现了业务的突破和发展。
优质企业。通过与我们的合作，他们获得了
大力支持，实现了业务的突破和发展。
0
通过 ISO9001 和 CE 认证
我们拥有自主品牌 ztrfm、专业的设计团队和技术人员。
0
国家 客户
深受用户欢迎和好评的产品。
0
一站式解决方案
从配件到成型机，解决您采购的复杂性。
0
工程师团队
我们拥有 20 多人的强大工程师团队，我们将提供更准确、更快速的解决方案。
