
超过 24 年的经验和国际标准知识、
技术变革与工业系统,我们致力于
为 Seds 的尊贵客户提供最佳和经济的解决方案。
技术变革与工业系统,我们致力于
为 Seds 的尊贵客户提供最佳和经济的解决方案。
C and Z Purlin Machine Automatic Version
沧州中拓滚压成型机械有限公司来自中国河北。它是一家致力于设计和制造的制造商。
不同类型的冷弯成型机。我们是一家历史悠久的工厂,自 2006 年以来一直从事冷弯成型机的设计和制造。我们能生产的机器包括:屋面瓦成型机、CZ 檩条成型机、轻钢龙骨成型机、金属压花机、门系统成型机、天花板系统成型机、高频焊管机、分切生产线、定长切割生产线、货架系统成型机、地板装饰板成型机、彩石瓦生产线、热贴膜机等。
不同类型的冷弯成型机。我们是一家历史悠久的工厂,自 2006 年以来一直从事冷弯成型机的设计和制造。我们能生产的机器包括:屋面瓦成型机、CZ 檩条成型机、轻钢龙骨成型机、金属压花机、门系统成型机、天花板系统成型机、高频焊管机、分切生产线、定长切割生产线、货架系统成型机、地板装饰板成型机、彩石瓦生产线、热贴膜机等。
如需了解更多信息、交货时间和价格,请给我们发邮件!
Description:An automatic C and Z purlin roll forming machine is an intelligent cold roll forming line specially built for manufacturing C purlins and Z purlins from galvanized steel coils. Unlike traditional manual-adjust purlin machines, this automatic version supports one-touch switching between C profile and Z profile, plus automatic size adjustment for purlin width, height and lip. It integrates uncoiling, leveling, servo feeding, punching, continuous roll forming and flying cutting into one fully automatic workflow, making it the preferred production equipment for steel structure component manufacturers, prefab building factories and solar bracket producers worldwide.

C and Z purline machine automatic version
Roll Forming Pass Design Principles & Deformation Control for C/Z Purlins
C/Z Purlin Roll Forming Deformation Mechanics & Pass Design Principles
Cross-Section Mechanics, Torsional Deflection & 3D Correction Solutions

5 Classic Types of Roll Forming Deformation & Inward-Lip Correction of CZ purline machine:
1.Lateral Camber (Sweep):
Root Cause: Asymmetrical longitudinal plastic strain or off-center coil infeed.
Remedy: Center the strip with entry guide rollers and equalize lateral roll clearances on both sides.
2.Longitudinal Bow (Up/Down Warping):
Root Cause: Strain imbalance between web and flanges, or pass baseline elevation fluctuation.
Remedy: Maintain a strictly constant bottom horizontal baseline and fine-tune top roll down-pressure in the final stands.
3.Helical Twist (Torsion):
Root Cause: Anti-symmetric bending moments across the machine centerline (especially in Z-purlins).
Remedy: Install inter-stand vertical constraint rollers and apply counter-torque micro-deflection via the exit Turkey Head straightener.
4.Edge Wave (Lip Buckling):
Root Cause: Excessive incremental bending angles , causing peak edge strain to exceed material yield limits.
Remedy: Adopt the "Lip-First" forming sequence to increase edge section modulus and smooth out the edge trajectory curve.
5.Corner Springback / Flare:
Root Cause: Elastic stress recovery upon exit from the forming rolls.
Remedy: Design 2∘∼4∘2∘∼4∘ over-bending (92∘∼94∘92∘∼94∘) in the pre-finishing passes to lock in exact 90.0∘90.0∘ angles after springback.

Based on the above problems and design principle, we design a new type C and Z purline machine.

The key points, from C to Z, it is totally different like other versions in the market:

C/Z Quick Changeover Principle: Dual-Layer Roller Technology
Our advanced C/Z Purlin Roll Forming Machine features an innovative **Dual-Layer (Two-Level) Roller Stand System** that allows seamless, fully automatic changeover between C-Purlin and Z-Purlin profiles in minutes via the PLC touch screen, completely eliminating manual roller disassembly!
🔹 1. Dual-Layer Integrated Tooling Architecture- **Upper Level (Layer 1)**: Pre-configured dedicated roller sets engineered for **C-Purlin forming**.- **Lower Level (Layer 2)**: Pre-configured dedicated roller sets engineered for **Z-Purlin forming**.- Both sets of tooling permanently reside inside the rigid machine stands simultaneously.
🔹 2. How It Works (Working Modes):- **When Producing C-Purlin**:
The motorized vertical drive lowers the **Upper Rollers** into the active pass line to form C-channels with inward return lips.- **When Producing Z-Purlin**:
The motorized vertical drive raises the **Lower Rollers** into the active pass line to form Z-sections with opposing flanges.
🔹 3. Motorized Automatic Positioning:- Individual top-mounted electric gear motors drive high-precision worm-gear screw jacks.- Changing from C to Z (and size adjustments across widths 80–300mm) is fully automated by entering parameters on the PLC touchscreen—reducing changeover time from **2–3 hours down to just 3–5 minutes**!


For more information, please check the machine working video:
On our website, we have more types CZ purline machine designs, you can choose the version you like. They are different in sizes range and automatic degree.
为什么选择我们?
OEM/ODM 和定制一站式服务
全面的售后服务支持

提供 OEM、ODM
1.沟通:确认买方要求。
2.技术人员设计:绘制型材图和 3D 机器图
3.确定配置和生产
4.交货前测试
2.技术人员设计:绘制型材图和 3D 机器图
3.确定配置和生产
4.交货前测试
5.包装和交付
6.技术指导
7.售后服务:复杂机器的安装服务和定期客户回访
6.技术指导
7.售后服务:复杂机器的安装服务和定期客户回访


受到 95800 多家公司的信任
我们很荣幸能与许多
优质企业。通过与我们的合作,他们获得了
大力支持,实现了业务的突破和发展。
优质企业。通过与我们的合作,他们获得了
大力支持,实现了业务的突破和发展。
0
通过 ISO9001 和 CE 认证
我们拥有自主品牌 ztrfm、专业的设计团队和技术人员。
0
国家 客户
深受用户欢迎和好评的产品。
0
一站式解决方案
从配件到成型机,解决您采购的复杂性。
0
工程师团队
我们拥有 20 多人的强大工程师团队,我们将提供更准确、更快速的解决方案。















































































