Corrugated roofing sheet roll forming machine

High Speed IBR Metal Roofing Sheet Machine

High speed Glazed Roofing Tile Machine

Ridge Cap Profile Making Machine

Arc Roof Tile Roll Forming Machine: Adjustable Curvature Metal Arch Roof Panel Production Line

If you manufacture building metal roofing for warehouses, hangars, livestock barns, exhibition halls and large-span buildings, an arc roof tile roll forming machine delivers finished curved roof panels directly from PPGI, GI and aluminum coils. Unlike separate straight forming plus secondary curving equipment, this integrated line forms the tile profile and bends the panel into a consistent circular arc in one continuous pass, reducing secondary handling, scrap and labour cost for your roofing projects.

Many buyers confuse two types of arch roof equipment: standalone crimp curving machines and all-in-one arc roof tile roll forming lines. A simple curving attachment only bends pre‑made flat panels. Our integrated arc roof tile forming line shapes the glazed tile / corrugated roof profile first, then applies controlled arch forming, so every finished tile has matched profile geometry and uniform curvature from end to end. This is critical for waterproof lap joints and clean visual appearance on exposed curved roofs.

Full Line Composition of Arc Roof Tile Roll Forming Machine

A complete automatic arc roof tile forming line runs coil to finished arched tile without repeated manual lifting. Standard configuration includes:

• 液压开卷机: 5–10 tonne capacity, hydraulic expansion mandrel for PPGI, galvanized steel and aluminum coils; optional double decoiler for non‑stop coil change
• Entry guiding & leveling unit: Multi‑roller leveler removes coil camber and twist before forming, preventing uneven bending and wave defects on the arch surface
• Main roll forming stations: Custom roll tooling for glazed tile, corrugated tile or other roof tile profiles. Rollers are made of Cr12MoV or GCr15 bearing steel, quenched HRC 58–62, hard chrome plated to avoid scratching pre‑painted surfaces
• Adjustable arch curving module: The core section of this machine. Adjustable roller spacing lets operators change arch radius via PLC touch screen, no heavy tooling replacement. Common adjustable radius range: 4.5 m to 12 m
• Hydraulic flying shear / stop shear: Fixed‑length cutting, clean burr‑free cut, compatible with continuous running
• Run‑out table & automatic stacker: Supports curved panels, protects painted coating from scratches, stacks finished arched tiles neatly
• 控制系统: PLC + HMI touch screen, frequency converter for speed regulation, recipe storage for different tile profiles and arch radii

Working Parameters & Material Range

This arc roof tile forming machine is widely used for small and medium roofing factories, metal building contractors and prefab house manufacturers.

• Working speed: 8–15 m/min (straight tile forming; arch forming speed is slightly lower for stable curvature control)
• Suitable material: PPGI, GI galvanized steel, aluminum coil
• Material thickness: 0.3–0.8 mm
• Adjustable arch radius: 4.5 m ~ 12 m (custom larger radius available on request)
• Common effective width: 800 mm, 840 mm, 900 mm, 1000 mm, 1050 mm (custom profile width acceptable)
• Cutting tolerance: ±1.5 mm per 6 m panel
• Total installed power: 18–30 kW, 3 phase, customizable voltage (380V, 415V, 440V, 480V for different markets)

The line supports both fixed‑radius mass production and frequent radius switching for custom jobs. If you receive mixed orders for curved farm sheds, warehouse arch roofs and market canopy roofs, the adjustable arch module will greatly improve equipment utilization.

Key Advantages of Integrated Arc Roof Tile Forming Line

One‑pass forming, better waterproof performance

Traditional workflow: form flat tile → transport → send to separate curving machine. Secondary positioning creates offset laps, uneven seams and hidden leakage risks. Our integrated line forms and curves in one flow, so the rib position and lap edge stay perfectly aligned after arching, greatly improving water‑tightness on curved roofs.

Flexible curvature adjustment

Change arch radius directly on the HMI screen. The arch roller group adjusts automatically; no need to disassemble heavy rollers or replace curving dies. One machine can produce shallow‑arc canopy tiles and deep‑arc large‑span barn roof tiles, ideal for job shops with diverse project orders.

Low scrap rate, protected coating

Chrome‑plated polished rollers run smoothly on color coated steel. Controlled cold forming avoids paint cracking on the curved surface — a common complaint when using cheap separate crimp curving machines. Uniform stress distribution reduces cracking at tile ribs.

Simple operation and low labour requirement

Normally 1–2 operators can run the whole line. Store recipes for each tile profile and arch radius; new workers can start production quickly after basic training. It cuts down the extra labour required for handling and re‑positioning flat panels on a secondary curving station.

Strong structural performance for large span

Arched metal roof tiles distribute roof load evenly. Finished panels are widely used for buildings without intermediate support columns, expanding usable internal space for warehouses, poultry houses, livestock shelters and temporary exhibition canopies.

Typical Application Scenarios

• Agricultural buildings: poultry farms, cattle sheds, grain storage barns
• Industrial prefab buildings: steel structure warehouses, factory arch roofs
• Commercial canopies: market stalls, gas station awnings, parking shelters
• Public temporary buildings: exhibition tents, stadium auxiliary roofs, disaster relief prefab buildings
• Villa and landscape curved roofing, decorative glazed arch roof projects

This machine is not limited to one single profile. We can customize roll dies for glazed tile, corrugated tile, step tile and other popular roof tile profiles, paired with the same adjustable arch curving unit.

What to Check Before Acceptance Test

When you test the arc roof tile roll forming machine, do not only check straight tile quality. Focus on arch‑specific items:

1. Consistency of arch radius: measure radius at the start, middle and end of one long panel; radius deviation should be within your drawing tolerance
2. Rib alignment: check whether the tile ribs keep symmetrical after curving, no twisting or offset
3. Surface condition: check paint cracking, roller marks and scratches on PPGI panels
4. Lap joint test: assemble two arched tiles together to confirm seamless overlap
5. Length accuracy: test multiple cut lengths under different arch radius settings
6. Repeatability: switch to another saved recipe, produce a new batch and verify the curvature stays stable

Many suppliers sell static curving machines with poor repeatability. If the arch radius drifts after every 10 panels, you will face fitting problems on site and high rejection rates.

FAQ

Q: Can this machine make both straight roof tiles and curved arc tiles?

A: Yes. You can turn off the arch curving module and produce normal flat roof tiles when you have flat roof orders. This makes the machine more versatile than a dedicated fixed‑arch line.

Q: What is the difference between this arc roof tile machine and a simple crimp curving machine?

A: Crimp curving machines only bend ready‑made flat panels. Our integrated line forms the tile profile and curves it in one continuous line, ensuring rib matching and better waterproof laps.

Q: Can I customize the arch radius range?

A: Yes. The standard adjustable range is 4.5 m–12 m. We can design wider or smaller radius modules according to your architectural drawings.

Q: What spare parts should I prepare?

A: Common wear parts include hydraulic cutting blades, sealing rings, proximity sensors and drive chains. We supply a standard spare parts package together with the machine.

Q: What after‑sales support is included?

A: One‑year warranty, overseas commissioning service, operation manual and video training, lifelong technical support and spare parts supply.