Automatic Sizes Changing Strut Channel Machine

24年以上の経験と知識国際規格、
技術的変化と産業システム、私たちの使命
セッズは、お客様にとって最善かつ経済的なソリューションを提供します。

機械類 Co.,Ltd を形作る滄州 Zhongtuo ロールは河北中国から来ます。それは設計および製造に専用されている製造業者です。
冷間ロール成形機の異なるタイプ。私達は 2006 年以来の機械を形作るロールの設計そして製造で従事している長い歴史の工場です。私達が作り出してもいい機械は下記のものを含んでいます: 機械、機械を作る cz の母屋を作る屋根瓦機械、機械を作る軽い鋼鉄キール、金属浮彫りになる機械、機械を形作るドアシステム天井システム高周波管の溶接機、ラインを切り開くこと、長さライン、機械を形作る棚システムを形作る床 Decking 機械、色の石造りのタイルの生産ライン、熱い薄板になるフィルムで形造る機械、等を切ります。

+86-317-2191158

[email protected]

Whatsapp：008615127755788

中華人民共和国佛山市佛頭区経済開発区4号路

詳細、納期、価格については、メールでお問い合わせください！

お問い合わせ

説明

Different from ordinary rolling machines, our Automatic Sizes Changing Strut Channel Machine adopts professional cold bending technology, without damaging the metal material structure. It can process galvanized steel, stainless steel, aluminum alloy and other raw materials, producing standard C-channel, U-channel and custom solar mounting struts widely used in rooftop solar systems, ground photovoltaic power stations and large-scale solar farm projects.

Support the sizes of 41×21, 41×41 and 41x62mm 41x72mm, 41x82mm Max thickness from 2 to 2.75mm GI steel. 3.0mm if not too many then okay.

Note: the thickness range the narrower and then profile will be more beautiful.

Size adjustment: PLC control, but you need to change the shearing blades.

The work flow for Channel ロール成形機

Series	詳細	パラメータ
Product	Raw material	GI
	Material thickness	2.75 mm mostly 3.0mm can not be always
	Cutting length	Adjustable
	Shearing Accuracy	350 to 550 Mpa
	Straightness	+_1.0mm/3m
	Section size	Bending less than 1‰/M
	Surface quality	According to drawing or sample

5Ton automatic hydraulic デコイラー

Type: hydraulic

Coil width: max 400 mm

Loading capacity: 3 tons

Inner diameter: 450-550 mm

Main roll forming machine

ロール成形機	Feeding device	With three rollers
	Rolling shaft	Shaft material: 45# STEEL
		Shaft diameter: 90 mm
		Tempering treatment
	ローラー素材	GB-Cr12
		Quenched treatment(heat treatment) 56-58 degree
	Rolling station No.	28 stations
	作業スピード	35 m/min
	Machine frame	Vertical arch frame structure 35mm
	ベアリング	中国有名ブランド・ハルビン
	仕事力	11KWX2+22KW=44KW
	トランスミッション	By gearbox

Online punching

Before punching:After punching Material of the punching die:GCr 12 quenched
Power supply:Hydraulic power Each time we can punch 10 holes. With energy tank to make sure the non-stop punching. Each time we punch 6 holes, and three punching station can punch 18 holes each time. Servo motor control.

PLC control system for many different sizes

Control system	Frequency brand	Delta brand or other brand
	PLC brand	Delta brand or other brand
	Screen type	Touch screen
	Screen language	English/Chinese/As required
	Encoder	Omron
	Low pressure electrical part	Schneider
	機能	Control the cutting length and quantity, speed adjustment
Note: in the PLC, we will input 4 sizes, simple click it and then you can choose the sizes to work. Machine will finish the sizes changing automatically.

Hydraulic Shearing System

油圧システム	Work type	Hydraulic flying cutting&punching
	Driving method	By pillar type Cylinder for hydraulic cutting&punching
	Hydraulic motor power	With energy tank
	Servo motor	AN CHUAN BRAND
	Punching mold	For oval holes
	Cutter material	D2
	切断長許容差	±1mm/3m
	Cutting feature	The hydraulic cutting is working well in the normal temperature
	Cutting feature	Steady and safe working condition
	Oil tube and wires connection	All the tubes and wires will be marked by the numbers or letters,So that it will be very easy to connect for the new.
Cutting feature Automatic cutting after forming, no distorting or wasting. Steady and safety, no have sounds by this cutting way The hydraulic cutting system will be installed on the main roll forming machine by seller. The hydraulic system is by cylinder driving, make the cutting working condition more steady. Meanwhile, there are two pieces of travel switches on the cutting system, it will make the record when the cutter up and down, and transmit the data to control system. The cutter material is D2, it’s especially using for the cutter material.

Product table

Table	Table length: 3000 mm， customer needs 3 sets：
	Table total width: 500 mm
	Table material: square pipe welded
As default	We give 3 meter as default.

Optional Automatic Stacker

Introduction to Equipment Configuration
1. Requirement: The height from the bottom of the front-end cold bending machine material to the ground should be between 850mm and 900mm, while others can be customized
2. Requirement: On site self provided gas source, 0.6~0.8MPa, 1~2m ³ gas storage tank (gas consumption per minute/0.3m ³ for a single device)
3. Requirement: Bring your own power supply on site, and use 4 * 6+1 * 2.5 or above power cords
4. Power specification: 380V, 50HZ three-phase (special can be customized)

Feeding section (variable frequency control, adjustable speed)
1. The feeding is equipped with high-speed rollers
2. The second stage feeding adopts rubber rollers to prevent slipping and scratching of the profiles.

Flip over section (servo control, simple structure, durable, basically maintenance free)

Stacking section
1. All profiles are made of heavy-duty materials
2. The palletizing gripper adopts a gripper type cylinder that is stable and reliable. (Cylinder model MH40D)
3. The base is made of 100 * 100 square tube for greater stability, and the forklift is more convenient
4. The drag chains are all heavy-duty, making them more stable for long-term operation

Electric control section

1. All adopt flipping, palletizing translation, palletizing lifting, and 3 sets of servo Weichuang systems. Long term/high-speed situations compared to stepping and gas.The cylinder is more stable. National warranty, convenient after-sales service.2. Fragile relays are all made of Japan’s Izumi professional world-class brand
3. The system operation is simple, one click operation, various types of alarms, safe and reasonable.

The frame body is welded with 100x100x4 square tubes.
The conveyor belts are all made of rubber rollers to prevent slippingThe feeding horizontal push adopts SC cylinder with rubber soft head, effectively preventing scratches on the profile
Flip using cylinder clamping servo rotation.
The slides are all made of precision square rail.
The palletizing adopts heavy-duty profiles and the lifting adopts gear rack transmission, which is stable and durable.
The palletizing translation platform is processed using a gantry milling machine for greater precision.

私たちを選ぶ理由

弊社は国家レベルのハイテク企業である。ISO9001品質システム認証、欧州CE安全認証、北米CAS認証などを取得しました。私達に輸出貿易で豊富な経験があり、異なった国の顧客の必要性を理解します。一方、我々は満足のいく設計ソリューションを顧客に提供することができます。私達の機械は 150 ヶ国以上に輸出され、私達は顧客との長期および安定した協同関係を確立し、顧客の賞賛に勝ちました。