A CZ Steel Profile Machine is a specialized industrial equipment designed for the precise cold-forming of steel coils or sheets into both C-shaped and Z-shaped steel profiles. Unlike single-function C-steel or Z-steel forming machines, our CZ machine features a convertible forming system that allows operators to switch between C-profile and Z-profile production with minimal downtime. Leveraging advanced servo-driven technology and precision-machined components, the machine enables continuous, high-accuracy fabrication of both profile types, ensuring consistent quality and dimensional stability.

The working process of the CZ Steel Profile Machine follows a streamlined, automated workflow tailored to dual-profile production. First, raw steel coils are securely loaded onto the uncoiling device, which ensures smooth and stable unwinding. The steel sheet then passes through the precision leveling unit, where multiple sets of hardened rollers eliminate warping and internal stress, laying the groundwork for accurate forming. Next, the flattened steel enters the convertible forming main machine: by adjusting the forming rollers and guide rails (a quick process that takes only 10-15 minutes), the machine can either bend the steel into a C-shaped profile or a Z-shaped profile. After forming, the continuous profile is fed into the high-precision punching device (optional) for pre-set hole punching, followed by the servo-driven cutting device that trims the profile into exact lengths. Throughout the process, the intelligent control system monitors every parameter, ensuring consistent quality and production stability.

This dual-profile capability makes the CZ Steel Profile Machine a cost-effective and space-saving solution for manufacturers. Instead of investing in two separate machines for C-steel and Z-steel production, enterprises can rely on a single CZ machine to meet diverse customer demands, reducing initial investment, workshop space occupancy, and maintenance costs.

Structure and Composition

Main Components

Hydraulic Uncoiler: As the starting point of the production line, the hydraulic uncoiler is designed to handle steel coils of various weights (up to 15 tons) and diameters. Equipped with an automatic centering function and anti-slip clamping mechanism, it ensures stable unwinding and prevents material deviation. The hydraulic drive system provides smooth and controlled uncoiling, adapting to different coil thicknesses and material types (such as galvanized steel, cold-rolled steel, and stainless steel).

Precision Leveling Unit: A critical component for ensuring profile quality, the precision leveling unit is equipped with 12-16 sets of Cr12MoV alloy steel rollers (hardened to 58-62 HRC). These rollers effectively eliminate unevenness, warping, and internal stress in the steel sheet, ensuring a flat and smooth surface. The roller gap and pressure are adjustable via the control system, adapting to steel sheets of different thicknesses (0.8-3.0mm). Poor leveling can lead to dimensional errors and structural defects, making this unit essential for consistent product quality.

Convertible Forming Main Machine: The core of the CZ Steel Profile Machine, this unit features a quick-change forming roller system and adjustable guide rails. The forming rollers are precision-machined to exact specifications for both C and Z profiles, ensuring gradual and uniform bending without damaging the steel surface. The quick-change mechanism allows operators to switch between C and Z production in just 10-15 minutes, significantly reducing downtime. The main machine’s transmission system adopts a servo motor and gearbox combination, providing stable power transmission and precise speed control.

High-Precision Punching Device (Optional): Tailored for structural connection needs, the high-precision punching device is equipped with interchangeable dies and a servo-driven punching mechanism. It can accurately punch holes of various sizes (φ6-φ16mm) and shapes (round, square) at pre-set positions on both C and Z profiles, with a punching accuracy of ±0.1mm. The punching process is fully synchronized with forming and cutting, eliminating the need for secondary processing and improving production efficiency.

Servo Cutting Device: Responsible for trimming continuous profiles into precise lengths, the servo cutting device adopts high-speed shear cutting technology. The servo motor ensures fast and accurate cutting, with a length tolerance of ±0.5mm. The device features an automatic waste collection system to reduce material waste and keep the workshop clean. Cutting lengths can be easily set and adjusted via the control panel, accommodating lengths from 3m to 12m (or custom lengths).

Hydraulic Station: Provides stable hydraulic power for the uncoiler, punching, and cutting devices. It consists of a high-pressure hydraulic pump, precision control valves, and a large-capacity oil tank with a cooling system. The hydraulic system features overload protection and pressure compensation functions, ensuring stable operation and extending component service life. The cooling system maintains hydraulic oil temperature at 30-50℃, preventing overheating and performance degradation.

Intelligent Control Cabinet: The “brain” of the machine, equipped with a 10-inch touchscreen HMI (Human-Machine Interface) and a high-performance PLC (Programmable Logic Controller). Operators can easily input and adjust parameters such as profile type (C/Z), dimensions, punching positions, and cutting lengths. The system supports real-time monitoring of production speed, output, and equipment status, with automatic fault diagnosis and alarm functions. It also records production data (e.g., daily output, fault logs) for easy production management and predictive maintenance.

Technische Parameter

Overall Dimensions: 8500mm × 1800mm × 1600mm (L×W×H), designed for compact workshop layout. The streamlined structure ensures easy integration into existing production lines while providing sufficient space for operation and maintenance.

Rolling Range: This wide range covers most common C and Z profile specifications, meeting the needs of construction, industrial, and mechanical manufacturing industries.

C-steel: Width 80-300mm, Height 40-200mm, Thickness 0.8-3.0mm

Z-steel: Width 80-300mm, Height 40-200mm, Thickness 0.8-3.0mm

Forming Roller Material: Cr12MoV alloy steel, quenched and tempered to 58-62 HRC. The material offers excellent wear resistance and impact resistance, ensuring stable forming precision even after 10,000+ hours of operation. The roller surface is precision ground to Ra0.8μm, preventing scratches on the steel surface.

Transmission Method: Servo motor + gearbox transmission, with a transmission efficiency of 98%. The servo motor enables stepless speed regulation (15-20m/min), adapting to different production speeds and material thicknesses. The gearbox features hardened gears for stable operation and low noise.

Motor Power: Main motor 15kW, hydraulic station motor 7.5kW, servo cutting motor 2.2kW. The high-power motor configuration provides sufficient torque for high-precision forming and cutting, ensuring stable operation even when processing thick steel sheets.

Productivity: 0-12m/min (stepless adjustable). At maximum speed, the machine can produce up to 720 meters of profiles per hour, meeting large-scale production needs. The stable production process ensures consistent quality even at high speeds.

Punching Accuracy (Optional): Punching position accuracy ±0.1mm, hole diameter accuracy ±0.05mm. High punching precision ensures tight fit with connecting components, reducing assembly errors.

Switching Time Between C/Z Profiles: 10-15 minutes. The quick-change mechanism minimizes downtime, improving overall production efficiency.