技術的変化と産業システム、私たちの使命
セッズは、お客様にとって最善かつ経済的なソリューションを提供します。
機械を作る機械を形作る台形のプロフィール ロールを形作る TR4/TR5 屋根シート ロール
冷間ロール成形機の異なるタイプ。私達は 2006 年以来の機械を形作るロールの設計そして製造で従事している長い歴史の工場です。私達が作り出してもいい機械は下記のものを含んでいます: 機械、機械を作る cz の母屋を作る屋根瓦機械、機械を作る軽い鋼鉄キール、金属浮彫りになる機械、機械を形作るドア システム天井システム高周波管の溶接機、ラインを切り開くこと、長さライン、機械を形作る棚システムを形作る床 Decking 機械、色の石造りのタイルの生産ライン、熱い薄板になるフィルムで形造る機械、等を切ります。
TR4/TR5 Roofing Sheet Roll Forming Machine
TR4/TR5 roofing sheet roll forming machine or we call it as trapezoid profile roll forming making machine is designed to make the metal roofing sheet machine by rolling forming working principle. Tr4 or Tr5 is the quite popular design in South American, especially in Peru. Here I will take the following drawing profile for you r reference:
For this profile, the most difficult part is that during the rolling forming, there maybe waves on the profile or there are some scratch on the surface of the coil. The reason as that the wave height is too high, it needs around 22 roller stations to do the rolling forming. Here is the machine design pictures for your reference:
The TR4/TR5 Roofing Sheet Roll Forming Machine is composed by the following elements.
|
|||||||||||||||||||||||||||||||||||
| The work flow for roof profile machine | |||||||||||||||||||||||||||||||||||
Why should Choose our Trapezoid Profile Roll Forming Making Machine?
- For the profile we can make sure 100% good as we have experience, we have sent around 20 sets per year same drawing to South American.
- For the roller we have our special design:
- For the PLC control system, Control station with aviation plug:
- For the language, we supports many type languages. And it allows you to set 20 batches production. The equipment control is PLC control, and multiple safety protection is set during normal production.
- The frame based is welded with steel plates. It is also tempered to eliminate internal stress and avoid deformation of the fuselage.
- The forming frame is cast iron structure and tempered. High strength and long service life.
- The material of the roll shaft is 40Cr, and the hardness is HB280 after quenching and tempering treatment.
- The material of the forming mold is Cr12, quenching treatment, hardness: HRC 56-62 °C.
- The transmission structure is double chain transmission,high-intensity operation, and long service life.
General Parameters of Trapezoid Profile Roll Forming Making Machine:
| NO | ITEM | パラメータ |
| 1 | 成形速度 | Max18m/min(depend on quantity of punching) 10-15METERS/MIN depends on the quantity of punching holes |
| 2 | Forming station | Around 22 groups |
| 3 | 総合力 | About 7.5 KW |
| 4 | Total Weight | About7500kgs |
| 5 | 電圧 | 220v,50hz,3p |
| 6 | Diameter of shaft | 90mm |
| 7 | Installation Size | 9.5 * 1.2 M*1.5 |
私たちを選ぶ理由
OEM/ODM＆カスタマイズワンストップサービス
充実したアフターサービス
OEM、ODMの提供
2.技術者の設計: デッサンのプロフィールおよび 3D 機械デッサンを作って下さい
3.構成と生産を決定する
4.納品前テスト
6.技術指導
7.アフターサービス：複雑な機械の設置サービスと定期的な顧客訪問
95800社以上の信頼
質の高い企業です。私たちとの協力を通じて、彼らは次のようなものを得ています。
強力なサポートを得て、事業の躍進と発展を遂げた。
